THE DIFFERENCE A COATING MAKES

OUR COATING OPTIONS EXPLAINED

We offer our roof sheets in a wide range of coatings and colours to match aesthetics as well as budget.This sometimes might be confusing, therefore here you can find an explanantion with all the details.

 

THESE ARE THE AVAILABLE COATING OPTIONS

THYSSENKRUPP PLADUR®

ThyssenKrupp PLADUR®

is available in MAT*(Wrinkle Mat) or Glossy (Ral premium)

thick-grain, double-layer coating system, with colours according to well-known patterns and min. coat thickness 35 microns. The sheets meet the requirements of class A2 in accordance with the Commission Decision 96/603/EC on fire protection and may be used in the corrosion category C4 according to the standard
EN ISO 12944-2.

We give up to 45 years warranty with our THYSSENKRUPP Pladur®Wrinkle mat and 25 years with PLADUR®Ral Premium Panels

 

PLADUR®RAL PREMIUM

Colour options

PLADUR®WRINKLE MAT

Colour options

ThyssenKrupp PLADUR® Wrinkle Mat Plus

Longest warranty on the market

coarse-grained, 2-layer coating system, in colours according to known colour schemes, with layer thickness of min. 50 microns.

PLADUR® Wrinkle mat plus

Our longest warranty. This coating will probably survive most of us.

PLADUR®WRINKLE MAT PLUS

Colour options

PLADUR® ICE CRYSTAL

Coating structure imitating patterns of frozen ice

sheets with a proprietary surface structure imitating patterns of frozen ice, triple-layer coating system, min. coat thickness 36 microns. The sheets meet the requirements of class A2 in accordance with the Commission Decision 96/603/EC on fire protection and may be used in the corrosion category C4 according to the standard EN ISO 12944-2.

PLADUR® ICE CRYSTAL

Warranty

PLADUR®ICE CRYSTAL

Colour options

PLADUR® RELIEF WOOD

Wood-like designed coating

sheets with a proprietary surface structure imitating wood, triple-layer coating system, min. coat thickness 36 microns. The sheets meet the requirements of class A2 in accordance with the Commission Decision 96/603/EC on fire protection and may be used in the corrosion category C4 according
to the standard EN ISO 12944-2.

PLADUR® RELIEF WOOD

Warranty

PLADUR®RELIEF WOOD

Colour options

TATA COLOURCOAT®

TATA®COLORCOAT HPS200 ULTRA

Coating with a metallic Galvalloy

HPS200 employs a tested metallic Galvalloy layer which is used exclusively by TATA Steel and is an alloy of 95% zinc with 5% aluminium, ensuring unparalleled protec on against corrosion. The thickness of the organic layer in the Colorcoat HPS200 Ultra ®product is 200 µm. The sheets Colorcoat HPS200 Ultra® may be used in the highest corrosion category C5 according to the standard EN ISO 12944-2. Furthermore,
if the roofing is made of the sheet Colorcoat HPS200 Ultra®, the external fire performance is classified
as B roof (t1), B roof (t2), B roof (t3) and the reac on to fire as C-s2, d0 according to the Commission Decision.

Colorcoat® HPS200 Ultra

Warranty

TATA®COLORCOAT HPS200 ULTRA

Colour options

SUPERIOR HB®

SUPERIOR HB®

Smooth Polyester surface

SUPERIOR HB – is a ground-breaking alternative for smooth polyester surface. Thanks to an addition of acrylic compounds, the coat texture is slightly grained and it reflects light with a flickering effect. The acrylic additive additionally hardens the paint surface and ensures higher resistance to scratching. Lacquered sheets with metallic coating SUPERIOR HB meet the requirements of class A1 in accordance with the Commission Decision 96/603/EC on fire protection. The products with SUPERIOR HB coating system may be used in the corrosion category C4 according to the standard EN ISO 12944-2.

SUPERIOR HB®

Warranty

SUPERIOR HB®

Colour options

ArcelorMittal®

ALUZINC®

Accelor Mittal AZ185

AZ185 into the production of roofing! Aluzinc is a sheet covered on both sides with an aluminium
and zinc alloy in an electroplating process similar to hot galvanizing process. Thanks to the component proportions of Aluminium 55%, Zinc 43.4% and Silicon 1.6% our products are highly resistant to corrosion thanks to the synergy between the zinc cathodic protection and aluminium screening effect. For manufacturing processes Blachotrapez uses only Aluzinc of 185 g/m² (subject to 25 years of warranty). The sheets meet the requirements of class A1
in accordance with the Commission Decision 96/603/EC on fire protection and may be used in the corrosion category C4 according to the standard EN ISO 12944-2.

ALUZINC®

Warranty

ALUZINC®

Colour option

Poliester standard mat ®(25 years) Poliester standard RAL ®(10 years)

coating providing high scratch resistance and UV stability.

The applied lacquer is a combination of a thick primer and a super-polyester topcoat, with the addition of ceramic and acrylic granules. This guarantees very-good resistance to external weather conditions.The Super Poliester Standard R-MAT coating has been developed for roofs and facades installed in sunny locations and areas with large annual temperature fluctuations.The resistance of the Super Poliester Standard R-MAT coating to UV rays and aggressive weather conditions ensures high product quality, which will last for years.The Coated Super Poliester Standard R-MAT has:

a semi-matte finish
high scratch resistance
very-good UV resistance
very-good resistance to external weather conditions
an ideal choice for both roofs and façades mounted in locations exposed to sunlight and in areas experiencing high annual temperature differences

Super Poliester Standard R-MAT®

 

Warranty

Super Poliester Standard R-MAT®

Colour options

Poliester standard mat ®(25 years) Poliester standard RAL ®(10 years)

Poliester in mat and glossy.

These coated sheets are the most popular option for metal roofing. Currently, sheets that
are double-side galvanised with anti-corrosive layer, priming or organic paint are used. The top layer provides the colour and texture, as well as protects against outdoor conditions.

Poliester standard mat ®(25 years) Poliester standard RAL ®(10 years)

Warranty

Poliester standard mat ®(25 years) Poliester standard RAL ®(10 years)

Colour options

Aluminium STUCCO MAT Corase®

ALUMINIUM PANEL

This material is extremely light at density of only 2.7g/cm3. This facilitates designing a lighter building structure, so you can save on construction costs.

The material is 100% renewable and recyclable, which makes it eco-friendly. It does not lose its own original properties during this process.

Heavy duty and durable. The tensile strength of currently produced aluminium alloys is compara- ble to steel. Aluminium is resistant to harsh weather conditions, making it often a natural choice in many applications.

The plasticity of the material makes it soft and easy to process for a roofer. This feature means that almost any product can be formed from aluminium.

Corrosion-resistant aluminium automatically self-covers with a thin layer of oxygen, rebuilding itself, which prevents further oxidation.

 

Aluminium STUCCO MAT Corase®

 

Warranty

Also availabel as a Aluminium Panel without the Stucco texture.

 
 

 

 

Aluminium STUCCO MAT Corase®

Colour options